Best corded vacuum, unlimited budget

2021.12.01 21:16 Scharfschutzen Best corded vacuum, unlimited budget

I am looking for a high-end corded vacuum. I currently have a Dyson cordless that replaced a Shark corded. I really liked both but I found myself using the Dyson because it was much more convenient, albeit less powerful. I gave my Shark to a family member. The Dyson's battery died after about two years, probably because I exclusively use it on MAX mode. I bought a new battery, but with two animals and a wife with long hair, it seems to lose suction without lots of constant maintenance (cutting hair out of the roller, cleaning it out with water, and now I don't use it on MAX mode anymore, etc.)
I've tried a Rainbow vacuum, which did a great job, but was very expensive at $2000 if I "bought it that day" or $3000 otherwise--a scam in my opinion. They have refurbished ones for $750-$1000 but do not have warranty. My main issue with them is that they are very large and cumbersome, with the requirement of having to drain and change the water reservoir after each use. I also have a HEPA filter that I run constantly so I'm not sure I'd benefit much from some of it's other features.
Is there a middle-ground vacuum that anyone recommends that's both convenient and powerful, with not a bunch of maintenance required? I typically use a steam-mop to clean the floors bi-weekly and do regular maintenance with the vacuum to pick up fur and whatnot. I feel I can't really find a better solution since I have flooring and a vacuum doesn't necessarily clean but I am curious of what suggestions people may have.
submitted by Scharfschutzen to VacuumCleaners [link] [comments]


2021.12.01 21:16 No_Implement4121 Should i fix my car or no? (transmission, breaks..)

Hi guys, first time posing here and looking for some advices!
I have 2011 Nissan Altima and it has 120k miles. I've noticed one of the front wheels make ticking sound when I drive 30-50mph.. and the sound goes away after like 5mins driving. I don't have issue when i'm turning.

I brought it to a mechanic to have it diagnosed.
here's the note : Noise heard in LF sounds like it was coming from the transmission when in the air rec trans shop. Recommend replacing front and rear struts, tires starting to cup. Lower control arm bushings weak. Front pads are marginal rotors shake a little when braking. LF cv axle starting to sling grease no play in wheel bearings.

I have very little knowledge on my car as i bought it when it had 90k miles. I drive less than 7k miles a year. My concern is the transmission.. Would it worth to have it replaced at this situation?
acc to Kbb the car worth 3k ish, haven't gotten any quote for the transmission yet...
Thanks for any comments!!!!
submitted by No_Implement4121 to MechanicAdvice [link] [comments]


2021.12.01 21:16 pedal_deals_bot Gibson Les Paul Custom Electric Guitar 2012 - 2018 - $3,125 ($3,000 + $125 S/H) 96%

submitted by pedal_deals_bot to guitar_deals [link] [comments]


2021.12.01 21:16 creepyjudyhensler Jack Scott- There's Trouble Brewin

Jack Scott- There's Trouble Brewin submitted by creepyjudyhensler to rockabilly [link] [comments]


2021.12.01 21:16 Jibbrock5 Dwade 🔥

submitted by Jibbrock5 to Chiraqology [link] [comments]


2021.12.01 21:16 smousigi Reshiram raid, adding up to 10 and will wait a few min for invites, be ready and online - 1547 1977 8019

submitted by smousigi to PokemonGoRaids [link] [comments]


2021.12.01 21:16 FarvaGrande Clear Kombucha

Clear Kombucha submitted by FarvaGrande to Kombucha [link] [comments]


2021.12.01 21:16 Big_MD [Hiring] Need Designing with Copywriting Skills for Email Newsletter Sequences

Hello,
The company I work for is looking for someone to design some Email Newsletters for a new marketing sequence. It should be 5 Newsletters in total, mainly general marketing material for us to send on a monthly basis and repeat through the 5 indefinitely.
Excellent english and copywriting skills to help express our offerings in the newsletter in the best possible fashion are a must.
We use Active Campaign and need them to be built in there.
Budget is $300. There is a potential for more future work if things go well.
submitted by Big_MD to forhire [link] [comments]


2021.12.01 21:16 Maledictione I’ve got (again🤷) A few questions for my fantastic 2 months old Border collie Puppy

  1. My puppy eats like the 3/4- 4/5 of the recommended portion of food (He is on Vetdiet). Is it ok? He gets of course a few treats during the day, but not that much..
  2. Next to my house is a small forest where we always go for a walk. I brought him home like almost 6 days ago, and I’ve alway let him off leash, because he always come back when getting called. However, I’ve read afterward that he might be too young to do that. I however plan to hike a lot with him, and I would love to trust him off leash one day (it’s like my ultimate goal). Is it too soon to put him offleash? I am afraid that if i put him on leash during theses sessions that I won’t be able after to call him like I can do now.
Thanks for your help again, I really apprecuate your expertise! 🌞
submitted by Maledictione to puppy101 [link] [comments]


2021.12.01 21:16 tallguyjim Info and General Questions Thread: December 2021

For any general questions about figures, buying, etc. please ask in here!
FIGURE INFORMATION
Links:

BUYING INFORMATION
Ok, so if you're getting into the line then the bets option is to import from Japan. Please be wary of your countries' import taxes so you aren't blindsided when you are charged a fee. Even with shipping costs and fees it is almost always cheaper to import than to buy from local retailers. Do NOT take the prices on eBay and Amazon as gospel, you can sometimes find deals on these sites but for the most part the prices on there are far, far higher than their market value (often hundreds of dollars higher).
Also these websites are your friend, if you have a question about the terms or shipping etc, then that information will be on the website, there's no point asking those questions here when there are people paid by those websites to answer those questions there.
NEW FIGURES
So for the best places to buy new figures, here are the best options:
PRE-OWNED FIGURES
With so many figure releases, a lot of older figures are no longer in circulation, with many, such as WonderFest exclusives being one-time-only releases. When the figures you want are no longer in stock, it's time to look on the aftermarket, for pre-owned figures. Here are the best sites:
PROXIES
If you're really serious about finding deals and don't mind getting your hands a little dirty, you can use proxy services. There are sites such as Yahoo Japan Auctions and Mercari Japan that are similar to Ebay, however you can't buy from them outside Japan. Proxy services will purchase the items for you and get them shipped to their warehouse, then they'll organise international shipping to you, there if a fee for this however. These sites are where the japanese text for names comes in handy, you will need to search on these sites in Japanese text, you can find the japanese text for things on the wiki and MFC linked above. These sites are also useful for the Medicos Exclusive items as you can request to buy them directly from Medicos' site here. The 2 most recommended sites for this are:
WARNINGS
submitted by tallguyjim to SuperActionStatue [link] [comments]


2021.12.01 21:16 pedal_deals_bot Gibson SG Standard with Maestro Vibrola 1963 - 1966 - $4,274 ($4,199 + $75 S/H) 79%

Gibson SG Standard with Maestro Vibrola 1963 - 1966 - $4,274 ($4,199 + $75 S/H) 79% submitted by pedal_deals_bot to guitar_deals [link] [comments]


2021.12.01 21:16 RainbowCrown71 How prevalent is saudade in your country's psyche? How does your country's culture view sadness, nostalgia, and longing?

There's a Portuguese/Brazilian term that was absorbed into the English lexicon a few decades back called saudade. To quote Wikipedia, it is:
"a deep emotional state of nostalgic or profound melancholic longing for something or someone that one cares for or loves. Moreover, it often carries a repressed knowledge that the object of longing might never be had again."
Another definition is:
"a vague and constant desire for something that does not and probably cannot exist, for something other than the present, a turning towards the past or towards the future; not an active discontent or poignant sadness but an indolent dreaming wistfulness."
It's not a universal cultural concept, and some cultures don't even have a concept of nostalgic sadness, instead holding parties and celebrations for funerals. Some cultures will teach you to focus on the future instead of "dwelling in the past" while others revere the past above all else.
So do people in your country normally try to drown sadness in happiness? Or does the culture accept sadness, nostalgic, melancholia, and saudade as OK? Does your country wallow in the past, or focus entirely on the future? Or somewhere in between? How prevalent is saudade?
Here in the U.S., for example, the culture leans heavily toward the former (celebratory, loud, future-oriented), but concepts like sausade are fairly common. We have an entire musical genre (Indie) devoted to evoking "nostalgia" or even longing for a time that was never yours:

submitted by RainbowCrown71 to asklatinamerica [link] [comments]


2021.12.01 21:16 legit-throw-a-away Government shutdown impact on clearance process?

If the government shuts down this week, how does DCSA handle the investigations they are currently working through?
submitted by legit-throw-a-away to SecurityClearance [link] [comments]


2021.12.01 21:16 Zebrut13 Traume după divorțul violent al părinților?

Am 20 de ani. Părinții mei au divorțat când aveam 9 ani. Înainte de separare inițiala a părinților se întâmplau aproape zilnic episoade violente între părinții mei. Zilnic trebuia să intervin cu lacrimi in ochi in momentul in care tata sarea sa o bată pe mama. Erau unele dați în care nu mai reușeam deloc fizic sa pot face ceva. Țin minte că mama a fost nevoită să își schimbe dantura din cauza unui conflict violent dintre cei doi. Amândoi lucrau împreună la firma lor de prelucrare a lemnului. Seara când se întoarceau din teren aveau obiceiul sa consume alcool. Tata cu restul angajaților iar mama singura pe unde putea ... amândoi au probleme din cauza alcoolului. Stau să mă întreb cât de tare mi-a afectat viața cele întâmplate și mă întreb dacă a mai trecut cineva prin situații asemănătoare...
submitted by Zebrut13 to Romania [link] [comments]


2021.12.01 21:16 dirtyharrison They're not trying to kill people with the jab.

submitted by dirtyharrison to TopConspiracy [link] [comments]


2021.12.01 21:16 pedal_deals_bot Gibson Custom Shop '68 Les Paul Custom Reissue - $3,280 ($3,154 + $126 S/H) 88%

Gibson Custom Shop '68 Les Paul Custom Reissue - $3,280 ($3,154 + $126 S/H) 88% submitted by pedal_deals_bot to guitar_deals [link] [comments]


2021.12.01 21:16 Brianshoe Cryptonomicon

Cryptonomicon submitted by Brianshoe to aiArt [link] [comments]


2021.12.01 21:16 2globalnomads Google prefer valid HTML but fails to produce it - Web & SEO Designers Forum

Google prefer valid HTML but fails to produce it - Web & SEO Designers Forum submitted by 2globalnomads to 2globalnomads [link] [comments]


2021.12.01 21:16 mexifra couldn't ask for a better more loving cat. rest easy squeaker. you'll be sorely missed.

couldn't ask for a better more loving cat. rest easy squeaker. you'll be sorely missed. submitted by mexifra to pics [link] [comments]


2021.12.01 21:16 pedal_deals_bot Fender Stratocaster 1961 - $10,430 ($10,304 + $126 S/H) 86%

Fender Stratocaster 1961 - $10,430 ($10,304 + $126 S/H) 86% submitted by pedal_deals_bot to guitar_deals [link] [comments]


2021.12.01 21:16 Joestar-Hung Stats

Stats submitted by Joestar-Hung to Zappa [link] [comments]


2021.12.01 21:16 b0yblu3_ I hope Kinsella gives me an A for my assignment

I hope Kinsella gives me an A for my assignment submitted by b0yblu3_ to Emo [link] [comments]


2021.12.01 21:16 oculusface Which Python library is best for counting objects using edge detection?

I'm wanting to create a program that will count a number of objects that are all touching, for example a number of boxes that are tightly packed together.
Any suggestions on which library to use would be appreciated. I'm thinking TensorFlow or OpenCV Cheers.
submitted by oculusface to AskComputerScience [link] [comments]


2021.12.01 21:16 telegramgod0 Teyana

Teyana submitted by telegramgod0 to TeyanaTaylor_ [link] [comments]


2021.12.01 21:16 NegotiationNew1483 Started dating a guy and it’s going great but friends aren’t supportive

30 (f) started dating 42 (m) very early days but I’ve known him for a year and so far things are great between us he makes me feel at ease already and is just genuinely lovely to me. I haven’t dating somebody as lovely as him for a long time and it feels so nice to be appreciated and wanted.
Anyway I don’t always tell my friends about people I’m dating as I don’t like to jinx it but I felt I could mention him as he is making me happy and I’m in a good place at the moment as I never ever have luck with men!!!
Since I’ve told my friends I’ve found out that the following has been said: My one friend to our other friend- “ the guys she’s dating is so fit he’s more my type than he is hers.” My best friend to me- “ he’s nothing special I don’t think he’s all that I’d say he’s a 4 out of 10”
All this really annoys me because I feel like no one is ever happy for me when they know I’ve had absolute hell with men for the past 7 years and I just don’t understand why people feel the need to be like this! What should I do about this situation?
submitted by NegotiationNew1483 to dating_advice [link] [comments]


http://ko-ka.ru